In order to mount this plug to a parting plane, I am going to need a flexible piece of material, something that will easily follow the curve of my fender plug without causing distortion. What I ended up with is a six-inch wide piece of mahogany door skin that will act as the parting plane that will be mounted to a one inch thick, six inch wide by 36 inch long piece of MDF.
To mount the fender plug to the door skin, I used some bondo to stick wooden blocks to the inside of the fender plug and then I screwed the mahogany to the blocks. I then used my hot glue gun to attach the ends of my newly mounted plug and parting plane to the MDF. Just for visual reference, what I ended up with was similar looking to the Dunlop walk-over bridges that you see crossing over the track at automotive races.
With the plug mounted, I am ready to start the molding process. As with all plug molds, I begin by filling any and all gaps that exist between the plug and the parting plane with clay. In this case, I had no gaps so I went straight for the mold release wax. Since my parting plane is a very porous mahogany, I used 5 full coats of wax to ensure that the chances of my plug sticking to the final mold would be minimal. I allow the wax to completely dry and then apply two coats of PVA mold release and allow it to dry.
This plug is now ready for molding. Anyone who has read any of my prior blog projects knows the process that I am about to explain. I begin by mixing enough black tooling gelcoat to brush a nice thick coat over the surface of my plug and parting plane. Once this cures to a tack, I apply three layers of 1 ½ ounce fiberglass matt and fiberglass resin.
When applying the fiberglass mat and resin, I am always careful to make sure that the material has no air bubbles trapped inside. This is especially important with the corners. In this case the critical area is where the plug meets the parting plane. Remember, hurrying through this portion of the mold build will result in defects in your final product. The more defects that you have – the more repairs you will have to make to your parts.
Happy Glassing
Steve
Fiberglass Fiberglass Mold Making Gel Coat Gelcoat Resin Fiberglass Blog Mold With Fiberglass Fiberglass Body Fiberglass Hoods Fiberglass Manual Custom Fiberglass Model Boats Compression Fiberglass model Fiberglass Fabrication Fiberglass Projects PVA Mold Release Dump GunFinishing Fiberglass Painting Fiberglass Shaping Fiberglass
Fiberglass Mat Fiberglass Cloth
